By monofrio - Thu Jun 13, 2019 11:11 am
- Thu Jun 13, 2019 11:11 am
#11724
So I looked through all 32 pages and could not see anyone with the same issue. I got to 2 scooters recently and I bought 2 boards from amazon. They were the blue fakes which I wasn't aware of until reading these threads. So the first scooter I did charged up all the way and then I installed the board and all the lights on the display turned on and I was getting one beep like every 5 minutes. The power button did nothing at all. I decided to see if the scooter would run as is and I took it out side and kicked off and hit throttle and it did run even though I had no controls from the new board. So sapped with the other new board and got the same problem. The board connected to m365 plus app but would not connect to segway ninebot app.
so I tried charging the second scooter but the light stayed red on the charger and the board would not do anything on this scooter. So what I did was remove the battery covers and checked the batteries and I noticed the difference in the batteries is that the little blue light on the dead scooter is not blinking. But here is where it gets weird. I checked the voltage on this battery and its 42v so that means its fully charged. So I took that battery and put it in the good scooter and the red light on the controller came on but the blue light on battery still did not come on and it would not charge on the scooter. I put the good battery to dead scooter and it started charging but the controller board battery does not turn red on the dead scooter.
I have since returned the fake boards back to amazon and ordered 2 real ones on ebay. No I am waiting to see if the real board will make the good scooter function properly but I am still stumped on the dead scooter. Do you guys think I need a new battery controller and battery board? thanks
so I tried charging the second scooter but the light stayed red on the charger and the board would not do anything on this scooter. So what I did was remove the battery covers and checked the batteries and I noticed the difference in the batteries is that the little blue light on the dead scooter is not blinking. But here is where it gets weird. I checked the voltage on this battery and its 42v so that means its fully charged. So I took that battery and put it in the good scooter and the red light on the controller came on but the blue light on battery still did not come on and it would not charge on the scooter. I put the good battery to dead scooter and it started charging but the controller board battery does not turn red on the dead scooter.
I have since returned the fake boards back to amazon and ordered 2 real ones on ebay. No I am waiting to see if the real board will make the good scooter function properly but I am still stumped on the dead scooter. Do you guys think I need a new battery controller and battery board? thanks