Page 1 of 4

M365 Pro Clone Dashboard on OG M365 instructions

Posted: Wed May 15, 2019 4:43 pm
by Whiteferrett
so short story even shorter... i got a clone m365 pro dash from alibaba to put on my og m365. 19$ for clone vs 80$ for verified original. installation was a breeze. but could not add custom firmware via bluetooth. found a solution to add the bluetooth to the clone board. https://trello.com/c/qNGoEkTJ/170-panta ... iaomi-m365 . using my st link i was able to add the bluetooth without having to even solder the st link on because the clone board just had solder pads i was able to just hold the st link wires to the board by hand an remain very still while the flashing was taking place. now when using m365downg it sees the ble as 0.9.0... so yes you can add a m365 pro dash to a og m365 and you dont have to worry about if it is original or clone

Re: M365 Pro Clone Dashboard on OG M365 instructions

Posted: Wed May 15, 2019 8:57 pm
by surveyorandrew
I’ll have to try this. I’ve been fighting with this crummy clone M365 board for awhile now.

Do you have a link where you got it from?

Re: M365 Pro Clone Dashboard on OG M365 instructions

Posted: Wed May 15, 2019 9:00 pm
by Whiteferrett
surveyorandrew wrote:
Wed May 15, 2019 8:57 pm
I’ll have to try this. I’ve been fighting with this crummy clone M365 board for awhile now.

Do you have a link where you got it from?
https://www.aliexpress.com/item/-/32719659857.html

Re: M365 Pro Clone Dashboard on OG M365 instructions

Posted: Wed May 15, 2019 9:02 pm
by surveyorandrew
Whoa, did you get the screen to work correctly? Have any pictures?

I paid $30 for this pos original M365 clone board. Should have waited To view images REGISTER or LOGIN for full access.

Re: M365 Pro Clone Dashboard on OG M365 instructions

Posted: Wed May 15, 2019 9:12 pm
by Whiteferrett
surveyorandrew wrote:
Wed May 15, 2019 9:02 pm
Whoa, did you get the screen to work correctly? Have any pictures?

I paid $30 for this pos original M365 clone board. Should have waited To view images REGISTER or LOGIN for full access.
So I have it on there and the only thing I have noticed not working is the cruise control
To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

Re: M365 Pro Clone Dashboard on OG M365 instructions

Posted: Wed May 15, 2019 9:30 pm
by druinthor
Huge upgrade over the 4 lights of the original. Anything difficult about doing this?

Re: M365 Pro Clone Dashboard on OG M365 instructions

Posted: Wed May 15, 2019 9:34 pm
by Whiteferrett
druinthor wrote:
Wed May 15, 2019 9:30 pm
Huge upgrade over the 4 lights of the original. Anything difficult about doing this?
Only hard part is getting the st-link all set up correctly... If you go with an original pro dashboard you don't have to worry about the st-link... and other than that it's essentially just plug and play

Re: M365 Pro Clone Dashboard on OG M365 instructions

Posted: Wed May 15, 2019 9:36 pm
by Whiteferrett
Also road the scooter 8 miles pulling a trailer and had no issues To view images REGISTER or LOGIN for full access.

Re: M365 Pro Clone Dashboard on OG M365 instructions

Posted: Mon May 20, 2019 12:17 pm
by OliverVR
I also bought a clone screen but I didn't had to flash it to load custom firmware (DRV155GONKA).

Firmware 155
BLE 009999
BMS 0116

MIJIA M365 Pro Xiaomi Scooter BT Printplaat met Display
https://s.click.aliexpress.com/e/ciXjz4OM

To view images REGISTER or LOGIN for full access.

Re: M365 Pro Clone Dashboard on OG M365 instructions

Posted: Tue May 21, 2019 12:33 am
by hightechhippie
So can I put this Board and screen in a regular mi365 or just a pro version?