Page 3 of 16

Re: HOW TO FLASH STOCK FIRMWARE INTO A SNSC 2.3 (VOI)

Posted: Mon Aug 17, 2020 2:53 pm
by mrracerhacker
some of the arduinos work but not all, no harm trying

Re: HOW TO FLASH STOCK FIRMWARE INTO A SNSC 2.3 (VOI)

Posted: Mon Aug 17, 2020 7:05 pm
by foued
hello i this is how to open the battery hatch lock and i is not how to flash the voi

Re: HOW TO FLASH STOCK FIRMWARE INTO A SNSC 2.3 (VOI)

Posted: Sat Aug 22, 2020 12:38 pm
by Maczilla
1. Flash bms via gps cable with CP2102 UART to USB adapter and iap Ninebot
2. Flash esc 126 full dump by 3 wires to STLink and plug-in power from battery or chargeport
3. Flash ble 110 full dump by 3 wires to STLink and plug-in power to the Dashboard by scooter.

Re: HOW TO FLASH STOCK FIRMWARE INTO A SNSC 2.3 (VOI)

Posted: Sat Aug 22, 2020 2:53 pm
by UgloBuglo
Maczilla wrote:
Sat Aug 22, 2020 12:38 pm
3. Flash ble 555 full dump by 3 wires to STLink and plug-in power to the Dashboard by scooter.
Don't!
Use a proper BLE fulldump, no need to use 555 for anything anymore.

Re: HOW TO FLASH STOCK FIRMWARE INTO A SNSC 2.3 (VOI)

Posted: Sun Aug 23, 2020 9:16 am
by foued
Image
Image


Hello
I have the solution to open the battery cover.
thank you for having answered for the solution of the voi.
I would like to have a diagram and the steps to follow and with what material because I am a novice in the field.

Re: HOW TO FLASH STOCK FIRMWARE INTO A SNSC 2.3 (VOI)

Posted: Sun Aug 23, 2020 3:20 pm
by Risitas98
Maczilla wrote:
Sat Aug 22, 2020 12:38 pm
1. Flash bms on P10 with iAp CP2102 UART to USB adapter
2. Flash esc 126 full dump by 3 wires to STLink and plug-in power in charge port.
3. Flash ble 555 full dump by 3 wires to STLink and plug-in power to the Dashboard by scooter.
To flash the original 4 led dashboard, I need to remove the c2 capacitor like in the original g30 right? And btw I wasn't able to flash the scooter. I soldered everything correctly but it shows me target not found or st link communication error

Re: HOW TO FLASH STOCK FIRMWARE INTO A SNSC 2.3 (VOI)

Posted: Tue Aug 25, 2020 12:03 pm
by Maczilla
Maczilla wrote:
Sat Aug 22, 2020 12:38 pm
1. Flash bms with iAp CP2102 UART to USB adapter
2. Flash esc 126 full dump by 3 wires to STLink and plug-in power in charge port.
3. Flash ble by 3 wires to STLink and plug-in power to the Dashboard by scooter.

Re: Hvordan at flash lager firmware i en SNSC 2,3 (VOI)

Posted: Tue Sep 15, 2020 1:40 pm
by kenned-skov
Maczilla wrote:
Sat Aug 22, 2020 12:38 pm
1. Flash bms on P10 with iAp CP2102 UART to USB adapter
2. Flash esc 126 full dump by 3 wires to STLink and plug-in power in charge port.
3. Flash ble 555 full dump by 3 wires to STLink and plug-in power to the Dashboard by scooter.
do you have the flash files for all 3 things ??? send me message if you have or where i can get it

Re: Hvordan at flash lager firmware i en SNSC 2,3 (VOI)

Posted: Wed Sep 16, 2020 11:13 am
by Risitas98
kenned-skov wrote:
Tue Sep 15, 2020 1:40 pm
Maczilla wrote:
Sat Aug 22, 2020 12:38 pm
1. Flash bms on P10 with iAp CP2102 UART to USB adapter
2. Flash esc 126 full dump by 3 wires to STLink and plug-in power in charge port.
3. Flash ble 555 full dump by 3 wires to STLink and plug-in power to the Dashboard by scooter.
do you have the flash files for all 3 things ??? send me message if you have or where i can get it
Don't lose time it will not work unless you found a way to loop the motherboard into reset mode like they did with ninebot g30 and snsc 2.0 boards.

Re: Hvordan at flash lager firmware i en SNSC 2,3 (VOI)

Posted: Wed Sep 16, 2020 3:40 pm
by kenned-skov
Risitas98 wrote:
Wed Sep 16, 2020 11:13 am
kenned-skov wrote:
Tue Sep 15, 2020 1:40 pm
Maczilla wrote:
Sat Aug 22, 2020 12:38 pm
1. Flash bms on P10 with iAp CP2102 UART to USB adapter
2. Flash esc 126 full dump by 3 wires to STLink and plug-in power in charge port.
3. Flash ble 555 full dump by 3 wires to STLink and plug-in power to the Dashboard by scooter.
do you have the flash files for all 3 things ??? send me message if you have or where i can get it
Don't lose time it will not work unless you found a way to loop the motherboard into reset mode like they did with ninebot g30 and snsc 2.0 boards. And to flash bms you also need to dismount the whole battery pack. Iap bms flashing change only the version number
what can i els dooo with it ?? maybe motherboard from max G30 ?