Scooter Talk

Posted: **Fri Nov 18, 2022 9:18 pm**

scooter graveyarder wrote: ↑
Sun Nov 13, 2022 9:01 am

admin wrote: ↑
Tue Nov 08, 2022 2:04 am
I don't understand why the 2 links don't work

I shared via a google drive it should work

https://docs.google.com/document/d/16sY ... _0Qbk/edit

let me know if the link works
anonfiles link works fine for me no problem, thanks for sharing!

i have tried this method and it connects to the scooter and displays various info
DRV 0.1.4
BMS 6.4.0
BLE 0.1.5
it will enter iap mode says its flashing with successfully but does not change ver
ive tried with iot connected and disconnected and tried heartbeat and unlock but
no change flashing drv and ble just say entering iap made and time out after short while
this seems like it it is locked somehow if i plug ninebot max dash in place of the max plus dash
it shows error10 and nothing seems to make any difference the ver snsc 2.3.3 drv has no st link pins
like previous any help appreciated

Posted: **Sat Nov 19, 2022 4:36 am**

maxpower wrote: ↑
Fri Nov 18, 2022 9:18 pm

scooter graveyarder wrote: ↑
Sun Nov 13, 2022 9:01 am

admin wrote: ↑
Tue Nov 08, 2022 2:04 am
I don't understand why the 2 links don't work

I shared via a google drive it should work

https://docs.google.com/document/d/16sY ... _0Qbk/edit

let me know if the link works
anonfiles link works fine for me no problem, thanks for sharing!
i have tried this method and it connects to the scooter and displays various info
DRV 0.1.4
BMS 6.4.0
BLE 0.1.5
it will enter iap mode says its flashing with successfully but does not change ver
ive tried with iot connected and disconnected and tried heartbeat and unlock but
no change flashing drv and ble just say entering iap made and time out after short while
this seems like it it is locked somehow if i plug ninebot max dash in place of the max plus dash
it shows error10 and nothing seems to make any difference the ver snsc 2.3.3 drv has no st link pins
like previous any help appreciated

it could be your uart adapter or bad wiring of your uart adapter because normally your drv and ble version shouldn't show up that way. And from what I understand from the tutorial you have to go directly to the command tab without flashing and click on unlock.

Posted: **Sat Nov 19, 2022 10:06 am**

ok so what your saying is becouse i didnt check heartbeat and unlock at first it has
made the esc drv or ble go into some type of locked state wich is why its not working
or could it be that this is the latest ver with no st link pins on the esc and a newer type iot
and ble is much bigger. i notice a post here from someone saying they have done older and
a few the newer ones via bluetooth and they say about bikes too but no further info
thanks in advance for thoughts

Posted: **Sun Apr 23, 2023 5:03 pm**

Maczilla wrote: ↑
Thu Aug 13, 2020 3:05 pm
Flashing mine this weekend, Will let you guys know how it went.

Update:
I flashed Bms via gps cable with iap Ninebot and esc to 1.2.6 with STLink and scooter can now drive.

Testing a fix for battery hatch lock
Google or pm me for more information.

Hi, do you have anywhere I can contact you?

Posted: **Mon Oct 02, 2023 11:07 pm**

admin wrote: ↑
Mon Nov 07, 2022 10:12 am
I think I found an easier way to convert 2.3 or 2.4, if you are interested I can do a tutorial

Whats this easy way you talk about converting 2.3?!

Posted: **Tue Oct 10, 2023 6:46 am**

Hello, can I have a working link to the instructions?
I will be very grateful!

Scooter Talk

HOW TO FLASH STOCK FIRMWARE INTO A SNSC 2.3 (NINEBOT MAX PLUS) (VOI)

Re: HOW TO FLASH STOCK FIRMWARE INTO A SNSC 2.3 (NINEBOT MAX PLUS) (VOI)

Re: HOW TO FLASH STOCK FIRMWARE INTO A SNSC 2.3 (NINEBOT MAX PLUS) (VOI)

Re: HOW TO FLASH STOCK FIRMWARE INTO A SNSC 2.3 (NINEBOT MAX PLUS) (VOI)

Re: HOW TO FLASH STOCK FIRMWARE INTO A SNSC 2.3 (VOI)

Re: HOW TO FLASH STOCK FIRMWARE INTO A SNSC 2.3 (NINEBOT MAX PLUS) (VOI)

Re: HOW TO FLASH STOCK FIRMWARE INTO A SNSC 2.3 (NINEBOT MAX PLUS) (VOI)