- Mon Oct 14, 2019 4:45 pm
#16447
Hi everyone,
I'm Sergio from France.
I recently acquired a Ninebot ES2 that was out of order.
I ordered and replaced the control card by a chinese/clone one.
When the stem is dismantled, everything seems to work properly.
But as soon as the stem is in contact with the rest of the scooter, the engine makes a loud noise and operates in shocks.
Error 18 then appears on the LCD display.
It seems there's a electronic ground issue.
I don't know where to start searching.
Thanks in advance for your help.
BR
Sergio.
ps : Sorry for my poor english, i use a translator
I'm Sergio from France.
I recently acquired a Ninebot ES2 that was out of order.
I ordered and replaced the control card by a chinese/clone one.
When the stem is dismantled, everything seems to work properly.
But as soon as the stem is in contact with the rest of the scooter, the engine makes a loud noise and operates in shocks.
Error 18 then appears on the LCD display.
It seems there's a electronic ground issue.
I don't know where to start searching.
Thanks in advance for your help.
BR
Sergio.
ps : Sorry for my poor english, i use a translator