- Tue Jun 04, 2019 3:59 pm
#11370
Originally made the mistake of plugging in the 5-pin Lyft controller harness to the 4-pin ES dashboard I got from Amazon, and of course, it fried instantly. I have a backup dashboard, but need to find an ES4 controller that will work.
Thanks in advance.
Where did you find an ES4 specific controller? I've been looking everywhere and can't find one. They all say ES1/2/3/4 compatible, and I can only assume they do not have the wiring provisions for the external battery found on the ES4.ThrowAway33 wrote: ↑Wed May 29, 2019 4:11 amWell, i converted the first of the couple scooters I got. I realized that I’d bought an es1/2 controller after I had disassembled the scooter. If you’re converting an es4 be sure the controller is an es4 controller. The difference is the connection bus for the external battery.
Also, the conversion was fairly difficult for me. It was hard to get the battery and controller out. Took a pair of vise grip needle nose and a long sharp pokey-hook thing to get the plastic retaining disk out that held the controller in place. Not too bad after that though, as long as you don’t encounter any stripped or over tightened screws.
Originally made the mistake of plugging in the 5-pin Lyft controller harness to the 4-pin ES dashboard I got from Amazon, and of course, it fried instantly. I have a backup dashboard, but need to find an ES4 controller that will work.
Thanks in advance.