Page 1 of 3
Segway Ninebot ES2 - App not updating firmware
Posted: Sat Jan 26, 2019 1:19 am
by JohnnyG
Greetings,
I Recently acquired a impounded BIRD Segway Ninebot ES2, I replaced the dash and board. I have downloaded the app in itunes, However I am not able to do the following
1. Scooter can be turned on via power button on dash without bluetooth activated.
2. I can connect to bluetooth and see scooter stats and other features.
Would I need to get a controller to take care of those problems ?
Many thanks in advanced.
Re: Segway-Ninebot App not updating firmware
Posted: Sat Jan 26, 2019 11:15 am
by Whiteferrett
What is the firmware version you have
Re: Segway-Ninebot App not updating firmware
Posted: Sat Jan 26, 2019 1:28 pm
by Coolcalmgabe
The Android app will update to version 0.5.0.5 but you won't be able to switch modes and for me the headlight decreases the speed. I get 16.5 mph max in white s which is the only mode available.
Here's some screens of the battery (both have the same firmware) and scooter firmware.
https://m.imgur.com/a/taheCZs
Re: Segway-Ninebot App not updating firmware
Posted: Sat Jan 26, 2019 7:20 pm
by JohnnyG
Whiteferrett wrote: ↑Sat Jan 26, 2019 11:15 am
What is the firmware version you have
I have 0.1.2.8 firmware
Re: Segway-Ninebot App not updating firmware
Posted: Sat Jan 26, 2019 7:21 pm
by JohnnyG
Im using a iOS device
Re: Segway-Ninebot App not updating firmware
Posted: Thu Feb 07, 2019 5:35 pm
by James007
I just got my new dash and I'm having the same problems mentioned in this thread. I'm on firmware 0.1.3.4 and master control firmware v0. 5.0.5 I'm using android and ios.
Anyone figure anything new out? I'm stuck on the white S and 17mph. can't change speed modes, even though I've completed the tutorial.
Re: Segway-Ninebot App not updating firmware
Posted: Tue Feb 12, 2019 7:49 am
by Coolcalmgabe
James007 wrote: ↑Thu Feb 07, 2019 5:35 pm
I just got my new dash and I'm having the same problems mentioned in this thread. I'm on firmware 0.1.3.4 and master control firmware v0. 5.0.5 I'm using android and ios.
Anyone figure anything new out? I'm stuck on the white S and 17mph. can't change speed modes, even though I've completed the tutorial.
5.0.5 is birds firmware that cannot be removed. You either need to jlink and flash a new one or buy a new cboardz.
Re: Segway-Ninebot App not updating firmware
Posted: Tue Feb 12, 2019 7:53 am
by kapranos
Yuo have to contact to the seller of the board/dash and ask for Ninebot credentials in order to change the serial number in the app
cheers
Re: Segway-Ninebot App not updating firmware
Posted: Tue Feb 12, 2019 8:26 am
by TIER
kapranos wrote: ↑Tue Feb 12, 2019 7:53 am
Yuo have to contact to the seller of the board/dash and ask for Ninebot credentials in order to change the serial number in the app
cheers
That doesn't work. Says no factory number not possible to change.
Re: Segway-Ninebot App not updating firmware
Posted: Tue Feb 12, 2019 10:56 am
by RSB0
I saw somewhere that is possible to do somekind of MITM atack to the firmware update servers and put stock or modded firmware and force update but unfortunately there is not much info online about it... In theory it could remove the rental firmware.
People on the ninebot Onewheel community are more advanced on this kind of hacks and maybe we from the kickscooter community can use some of that info since the APP is the same.
Share what you find
TIER wrote: ↑Tue Feb 12, 2019 8:26 am
kapranos wrote: ↑Tue Feb 12, 2019 7:53 am
Yuo have to contact to the seller of the board/dash and ask for Ninebot credentials in order to change the serial number in the app
cheers
That doesn't work. Says no factory number not possible to change.
