Making it fold?
An Electric Scooter Community on a Mission to Stamp out Transportation Mediocrity.
Making it fold?
Were you able to repair the burned control board? I have a Ninebot that also locked up the same way.Sabadello wrote: ↑Sat Jun 29, 2019 4:02 pmHey guys!
Anyone been out for this strange thing with KERS after replacing the control board and dash?
After the swap it ran successfully for 3-5minutes and when I e-braked from maximum speed it had a strange move and after that the front wheel was stuck in almost like an soft e-brake was engaged all the time. Not responding to throttle, but dash and brake light still works as designed.
When disconnecting the blue/yellow/brown thick cables to the hub motor, the electro magnetic resistans stops. If plugging it in again = it's still there.
Have I fried the control board when regenerating braking? After all.. it's Chinese parts (not the cheapest though). The scooter doesn't even have to be powered on to have the electro magnetic resistans.
Yep, it did burn
To view images REGISTER or LOGIN for full access.
Did you figure it out? I had the same problemproplane64 wrote: ↑Fri Jan 11, 2019 5:34 amI have a Bird ES4 scooter (per the label on the bottom, but there are no undercarriage track lights, so who knows!? Maybe it's an ES2). I removed the Bird GPS unit and replaced the Bird dash with a replacement dash (link at bottom) - I did not reconnect the headlight (do I need to reconnect the headlight at all or can I leave it unplugged?). The top 3 lights on the dash turn on (white) and the 4th light turns on as green (which I read indicates ECO mode). Most of the scooter apps connect to the scooter, but display no data (no serial numbers, no version/firmware info, no battery info). Hitting the throttle does nothing - I haven't reconnected all of the parts to make it a physically rideable scooter yet but tried pushing off manually and hitting throttle, but still nothing. Brake lights do not come on at any point. Any ideas?
Did u put a clone dashboard? And how did you managed to unlock the scooter if u can't connect via bt to scooter?k3nny wrote: ↑Tue Oct 01, 2019 9:53 amhi i tried just to chang out the handelbar display and kept the "main control board.
it worked but i couldn't change to the red sport mode. it just stood to the regulare sport mode and i could change nothing on the app.
do any know a work around without changing out the main controllboard
I did it but it's not going do u have to update firmware before you use ? Or is there any other wire harness like Lyft scooter have wire harness at bottom ??humanbeing21 wrote: ↑Sat Dec 29, 2018 7:40 pmTools Needed for the Hack
You will need security bits to take the scooter apart and linked below is the recommended tool kit. It includes all the bits you'll need to disassemble any scooter.
Thank you to @bikeaddiction for finding this!
Hi! I discovered the same! Please let us know if[…]
Any input is appreciated, and as you said hop[…]
Im a bit confused, is 35-40km/h possible then? I[…]
Did you ever fix this issue? Is it just easier to […]