Page 30 of 39

Re: Ninebot ES2 Firmware Hack - Bird & Lime Scooters (Speed Hack)

Posted: Wed May 01, 2019 5:33 pm
by FirstJuicerInTown
No, if you have removed the gps module, then its nit here. Probbably someone has ratted on you, or he just saw it walking by and decided to randomly check it.

But anyway, its very weird and somewhat scary.

Re: Ninebot ES2 Firmware Hack - Bird & Lime Scooters (Speed Hack)

Posted: Wed May 01, 2019 5:40 pm
by Oscar
Como puedo usar la ninebot sin usar el celular?

Re: Ninebot ES2 Firmware Hack - Bird & Lime Scooters (Speed Hack)

Posted: Wed May 01, 2019 8:45 pm
by nico perico
I have a jump s4, in the front part I have a gsm module with imei, is that the tracker?

Re: Ninebot ES2 Firmware Hack - Bird & Lime Scooters (Speed Hack)

Posted: Sun May 05, 2019 10:45 pm
by Geoff160
Edward wrote:
Wed Apr 17, 2019 4:50 pm
Need a little help! I have a bird Segway ES1 (I believe) that turns on for a second when you power on ,but then the dashboard goes blank. I am still able to ride it ,but there is no display. I checked my connections to the display and they are all good. Lights for front and brake are all functional just no display.. Someone please help. Thanks in advance.
I’m having the same issue, on an ES4. I’ve heard this is because it’s a set of Jump handlebars on a Bird body, but I’m not sure. Any thoughts? What should be replaced to get the display and Bluetooth to work?

Re: Ninebot ES2 Firmware Hack - Bird & Lime Scooters (Speed Hack)

Posted: Tue May 07, 2019 3:03 pm
by James007
Geoff160 wrote:
Sun May 05, 2019 10:45 pm
Edward wrote:
Wed Apr 17, 2019 4:50 pm
Need a little help! I have a bird Segway ES1 (I believe) that turns on for a second when you power on ,but then the dashboard goes blank. I am still able to ride it ,but there is no display. I checked my connections to the display and they are all good. Lights for front and brake are all functional just no display.. Someone please help. Thanks in advance.
I’m having the same issue, on an ES4. I’ve heard this is because it’s a set of Jump handlebars on a Bird body, but I’m not sure. Any thoughts? What should be replaced to get the display and Bluetooth to work?
The Jump dashboard has bluetooth turned off plus jump firmware. Follow the tutorials and flash it. Then the dash will not turn off. While your at it you can try to flash the firmware and get rid of the bird controller firmware.

Re: Ninebot ES2 Firmware Hack - Bird & Lime Scooters (Speed Hack)

Posted: Sat May 11, 2019 11:05 pm
by Edward
How exactly do I flash firmware?

Re: Ninebot ES2 Firmware Hack - Bird & Lime Scooters (Speed Hack)

Posted: Sat May 11, 2019 11:11 pm
by Edward
James007 wrote:
Tue May 07, 2019 3:03 pm
Geoff160 wrote:
Sun May 05, 2019 10:45 pm
Edward wrote:
Wed Apr 17, 2019 4:50 pm
Need a little help! I have a bird Segway ES1 (I believe) that turns on for a second when you power on ,but then the dashboard goes blank. I am still able to ride it ,but there is no display. I checked my connections to the display and they are all good. Lights for front and brake are all functional just no display.. Someone please help. Thanks in advance.
I’m having the same issue, on an ES4. I’ve heard this is because it’s a set of Jump handlebars on a Bird body, but I’m not sure. Any thoughts? What should be replaced to get the display and Bluetooth to work?
The Jump dashboard has bluetooth turned off plus jump firmware. Follow the tutorials and flash it. Then the dash will not turn off. While your at it you can try to flash the firmware and get rid of the bird controller firmware.
How exactly do I flash firmware? I bought a new display from eBay and everything worked great for about a minute. I was able to connect Segway app. Then as soon as I get on it to move everything goes blank and nothing works. Tried putting original dash back in and nothing. I think my main control board is fryed... I have no voltage going to dash now. I do have 37v on one of the wires. Everything else is Dead. Any help would be greatly appreciated.

Re: Ninebot ES2 Firmware Hack - Bird & Lime Scooters (Speed Hack)

Posted: Sun May 12, 2019 6:43 pm
by James007
Edward wrote:
Sat May 11, 2019 11:11 pm
James007 wrote:
Tue May 07, 2019 3:03 pm
Geoff160 wrote:
Sun May 05, 2019 10:45 pm

I’m having the same issue, on an ES4. I’ve heard this is because it’s a set of Jump handlebars on a Bird body, but I’m not sure. Any thoughts? What should be replaced to get the display and Bluetooth to work?
The Jump dashboard has bluetooth turned off plus jump firmware. Follow the tutorials and flash it. Then the dash will not turn off. While your at it you can try to flash the firmware and get rid of the bird controller firmware.
https://hackmd.io/s/Bki2fcWwE

How exactly do I flash firmware? I bought a new display from eBay and everything worked great for about a minute. I was able to connect Segway app. Then as soon as I get on it to move everything goes blank and nothing works. Tried putting original dash back in and nothing. I think my main control board is fryed... I have no voltage going to dash now. I do have 37v on one of the wires. Everything else is Dead. Any help would be greatly appreciated.
https://hackmd.io/s/Bki2fcWwE

Re: Ninebot ES2 Firmware Hack - Bird & Lime Scooters (Speed Hack)

Posted: Mon May 20, 2019 7:48 am
by John John5
ARe the image on how to guide removed?

Re: Ninebot ES2 Firmware Hack - Bird & Lime Scooters (Speed Hack)

Posted: Tue May 28, 2019 10:40 pm
by Dz4shsy
I have 4 scooters, two of them work fine and the other two the battery level indicator doesn’t show, the Bluetooth won’t connect the ninebot app, it finds the scooter fine but won’t actually connect and the scooter doesn’t work, it won’t move. I’ve tried searching everywhere but I can’t find anyone who has had this issues and posted about it