An Electric Scooter Community on a Mission to Stamp out Transportation Mediocrity.

Discuss the Segway Ninebot ES and Ninebot Max Kick Scooter in this Forum. Topics include the Segway-Ninebot app, hardware, street riding, etc.
By Uart
Posts
#52918
Hi folks,

Has anybody got their hands/soldering irons on one of these yet?

I'm wondering how much of the method previously posted for the 2.3 would work here.

Thoughts/opinions/rants welcome.
egilmela, bagnare liked this


By Uart
Posts
#52933
thisisstan85 wrote:
Sun May 02, 2021 6:27 pm
Its the same esc as 2.3, bigger motor.
Thanks for the confirmation, I'm working on a 2.3.2 and suspected the ESC was the same. So STlink to 1.2.6 should work here too?

BLE? BMS? I've read that due to the increase in capacity (500wh to 1004wh) the BMS has a different PCB so flashing with a Uart via the GPS/IOT port won't work here.

Ditto BLE, I've read that due to a revision it won't flash to 1.1.0 via STlink.

What's wrong with my m365 scooter

i replaced the controller

What's wrong with my m365 scooter

i replaced the controller

So I take it this doesn't work on a Hopr SNSC.2.2 […]

Wheels 2.0 "Atlas" Unveiled

Or replace the Bluetooth speaker pcb to enable?