Page 1 of 2
DOTT version 3
Posted: Tue Jul 07, 2020 3:12 pm
by Cordobas
Hello.
I have a Dott 3 and I want to convert it as a personal scooter.
Did anyone make one?
Any tutorial or advice is welcome.
Re: DOTT version 3
Posted: Fri Jul 10, 2020 2:13 pm
by Ziss
No easy hack.
Only option I know:
* Cut the battery open to bypass the BMS
* Get an ESC from aliexpress
* Rewire everything
Re: DOTT version 3
Posted: Sun Jul 12, 2020 8:36 am
by lexfire
Hi,
Bypass battery and put generic controler
Re: DOTT version 3
Posted: Mon Jul 13, 2020 10:37 pm
by Cordobas
lexfire wrote: ↑Sun Jul 12, 2020 8:36 am
Hi,
Bypass battery and put generic controler
Hello.
Do you know how to bypass the battery and how to put the generic controller ?
Re: DOTT version 3
Posted: Wed Jul 15, 2020 3:15 am
by lexfire
cut the battery & bypass it ! ( Bypass mean you need to find a solution to get constant 54V instead of using the bms who's doing a protection ! It's very easy to find where to bypass it with a multimeter )
There is a lot of tutorial on this website to put generic controler.
Re: DOTT version 3
Posted: Wed Jul 15, 2020 1:16 pm
by Cordobas
lexfire wrote: ↑Wed Jul 15, 2020 3:15 am
cut the battery & bypass it ! ( Bypass mean you need to find a solution to get constant 54V instead of using the bms who's doing a protection ! It's very easy to find where to bypass it with a multimeter )
There is a lot of tutorial on this website to put generic controler.
Thank you. I don't find any tutorials here. Please put here a link if you see a tutorial about DOTT.
Re: DOTT version 3
Posted: Thu Jul 16, 2020 3:26 am
by lexfire
Hi, there is no tutorial about DOTT but it's always the same thing to do.
Plug motor, hallsensor, LCD and battery
Re: DOTT version 3
Posted: Wed Jul 22, 2020 4:17 am
by anakin205
There is a much easier and cheaper solution to convert. You have to use an Arduino nano which will emulate Dott iot.
It worked pretty fine for me
Re: DOTT version 3
Posted: Wed Jul 22, 2020 8:34 am
by Peter Meter
anakin205 wrote: ↑Wed Jul 22, 2020 4:17 am
There is a much easier and cheaper solution to convert. You have to use an Arduino nano which will emulate Dott iot.
It worked pretty fine for me
What code did you use?
Re: DOTT version 3
Posted: Wed Jul 22, 2020 11:34 am
by Cordobas
anakin205 wrote: ↑Wed Jul 22, 2020 4:17 am
There is a much easier and cheaper solution to convert. You have to use an Arduino nano which will emulate Dott iot.
It worked pretty fine for me
Please can you help me with a tutorial and some diagram pictures?
Is it working Arduino Nano (because i have one)?
