An Electric Scooter Community on a Mission to Stamp out Transportation Mediocrity.

Changing the way we think about travel
By Cordobas
#22095
Hello.

I have a Dott 3 and I want to convert it as a personal scooter.
Did anyone make one?
Any tutorial or advice is welcome.

:?: :?: :?:
Image
By Ziss
#22116
No easy hack.
Only option I know:
* Cut the battery open to bypass the BMS
* Get an ESC from aliexpress
* Rewire everything
By Cordobas
#22149
lexfire wrote:
Sun Jul 12, 2020 8:36 am
Hi,

Bypass battery and put generic controler :D
Hello.

Do you know how to bypass the battery and how to put the generic controller ?
User avatar
By lexfire
#22156
cut the battery & bypass it ! ( Bypass mean you need to find a solution to get constant 54V instead of using the bms who's doing a protection ! It's very easy to find where to bypass it with a multimeter )

There is a lot of tutorial on this website to put generic controler.
By Cordobas
#22161
lexfire wrote:
Wed Jul 15, 2020 3:15 am
cut the battery & bypass it ! ( Bypass mean you need to find a solution to get constant 54V instead of using the bms who's doing a protection ! It's very easy to find where to bypass it with a multimeter )

There is a lot of tutorial on this website to put generic controler.
Thank you. I don't find any tutorials here. Please put here a link if you see a tutorial about DOTT.
User avatar
By lexfire
#22167
Hi, there is no tutorial about DOTT but it's always the same thing to do.
Image

Plug motor, hallsensor, LCD and battery
By anakin205
#22207
There is a much easier and cheaper solution to convert. You have to use an Arduino nano which will emulate Dott iot.
It worked pretty fine for me
By Peter Meter
#22209
anakin205 wrote:
Wed Jul 22, 2020 4:17 am
There is a much easier and cheaper solution to convert. You have to use an Arduino nano which will emulate Dott iot.
It worked pretty fine for me
What code did you use?
By Cordobas
#22214
anakin205 wrote:
Wed Jul 22, 2020 4:17 am
There is a much easier and cheaper solution to convert. You have to use an Arduino nano which will emulate Dott iot.
It worked pretty fine for me
Please can you help me with a tutorial and some diagram pictures?
Is it working Arduino Nano (because i have one)?

Any one got any info on beryl bikes I seen a few i[…]

Hej Guys got my hands on this double battery pac[…]

As this was a rental version whos overstock was ev[…]

This last transistor needs to be soldered. https:[…]