M365 Clone - FREEGO ES-08S V2.0 (Go X app scooter??) - Page 3

An Electric Scooter Community on a Mission to Stamp out Transportation Mediocrity.

M365 Clone - FREEGO ES-08S V2.0 (Go X app scooter??)

23 posts

Re: M365 Clone - FREEGO ES-08S V2.0 (Go X app scooter??)#16349

By Patise - Thu Oct 10, 2019 9:02 am

- Thu Oct 10, 2019 9:02 am #16349

lol, it looks total like this one from xiaomi - https://vosveteit.sk/xiaomi-prekvapil-n ... a-par-eur/ how much pls cost? is cheaper

Re: M365 Clone - FREEGO ES-08S V2.0 (Go X app scooter??)#20530

By rsninebot - Wed Apr 08, 2020 8:08 am

- Wed Apr 08, 2020 8:08 am #20530

same problem did you solve somehow?

Re: M365 Clone - FREEGO ES-08S V2.0 (Go X app scooter??)#58017

By 68pishta - Wed Aug 02, 2023 1:08 am

- Wed Aug 02, 2023 1:08 am #58017

How does one start these up? Power button is non functional on mine. I looked at display board and SW pin under power button is 37V and the next pin over is 12V. It seems all the boards on the web say these 2 are the switch ON leads, ie jump them (or push button) to turn controller on. All jumping these pins does to my BMS is to drop battery voltage to 10V, yet I still see 37V before the BMS. do I have a shorted controller or am I strapping the wrong pins to jump start this? Ill go full alibaba on this for $22 for a new controller/display/throttle/etc but would like to see if the battery BMS is at fault.