Page 1 of 14

DOTT scooter

Posted: Fri Feb 22, 2019 12:36 am
by percee89
Here are the new trolleys from DOTT deployed in Brussels.

They were using the es4 and have just switched to this model
Image
Image
Image
Image
Image
Image

Re: DOTT scooter

Posted: Mon Mar 25, 2019 8:56 am
by FanKil
What is the model of this scooter? Is it available in the market?

Re: DOTT scooter

Posted: Wed May 08, 2019 2:43 am
by popo
FanKil wrote:
Mon Mar 25, 2019 8:56 am
What is the model of this scooter? Is it available in the market?
i have one, i take off the motherboard and i can't doImage nothing with 4 wires of trottle
Image

Re: DOTT scooter

Posted: Thu Jun 20, 2019 4:21 pm
by Gilles99
Are you sure of your re-wiring.? On photo i see a mistake i think..

Re: DOTT scooter

Posted: Mon Jun 24, 2019 11:11 pm
by JONYM
Hi there , this is a Brushless dc controller 36v 250w , anybody knows the wiring ? Throttle , brakes and other things ? The motor is Hub motor 36v 300w and the battery is 36v 12ah pleasee im dyingggg :?: :?: :?:

Re: DOTT scooter

Posted: Tue Jun 25, 2019 5:53 pm
by Risitas98
How was the design of dott es4 ? Have you any picture of dott es4 version ?

Re: DOTT scooter

Posted: Sat Jun 29, 2019 6:22 pm
by Gilles99
I havé succèss on rebrain a dott scooter.
For info , as me..

Re: DOTT scooter

Posted: Wed Jul 03, 2019 1:55 am
by Funk777
Gilles99 wrote:
Sat Jun 29, 2019 6:22 pm
I havé succèss on rebrain a dott scooter.
For info , as me..
Hello Gilles,

I'm interested to your successful work about Dott rebrain process!
You can tell me more?
Please!
:D

Re: DOTT scooter

Posted: Wed Jul 03, 2019 2:53 pm
by niamor91
Image

Re: DOTT scooter

Posted: Sun Jul 07, 2019 7:33 am
by Gilles99
You ve tree wire from throttle and tree from break , all two goes to brain.
The are 5v supplies by the brain ,thé brain itself is supplied by 36v from battery .
You need a new controller with its display from AliExpress .
Cut the throttle and break wire, original brain goes to trash. Re wire all (not the orange connecter from battery , that s i don’t Know ?)
On controller you ve got one 4wire connecter , that s 5v , ground, break and throttle signal..
on controller you ve got a 3big wire that phase of motor, and 5thin wire that are the hall sensor (5v, ground , and tree hall feedback) so hère is thé biggest challenge 3wire motor, that can be switch itself( that done 6possibility) and the 3wire from hall( that done 6possibility too) so 6x6 done 32 possibility just to good wire the motor.. if you done this , the last Step is easy.
My last challenge it s to change thé tree wire from break that give a proportionnal voltage to a two wire switch that give ground to break wire controller .

I hope i ve helped.. ;)