Page 1 of 1

Frayed Wire on zero motor

Posted: Tue Sep 24, 2019 6:11 pm
by hudgat
Hey guys I was a dumbass and did not cover the motor wire on my zero motor and a crash frayed it open as so:
https://photos.app.goo.gl/b7knJSbJUTMw4i6c9

Any idea on how to begin fixing it?

Re: Frayed Wire on zero motor

Posted: Wed Sep 25, 2019 4:38 am
by onoff
hello ,

you maybe have to disasemble the motor of the frame and you have to open the motor in two part to have access to the wires , then you have to use heat shrink on every wires one by one and then heat shrink over all together , or other solution , as you have to pass thought the nut with you wires it mmaybe too ticker if you use heat shrink , in this case you can change all the connection wire

Re: Frayed Wire on zero motor

Posted: Thu Sep 26, 2019 9:42 pm
by hodrodbob
I'd suggest based off the damage, you may have to open the motor and wire new cabling in directly. I would do that based off the damage