Page 1 of 1

Ninebot ES2 - error 49

Posted: Wed May 15, 2019 2:49 pm
by FirstJuicerInTown
Hello, I just flashed dashboard and uploaded new firmware to motherboard through ESdownG app. When finished, I'm getting error 49. I can't find any info about this error. Have anyone experienced this? Do you know how can i fix it?

Re: Ninebot ES2 - error 49

Posted: Tue Jun 11, 2019 12:36 pm
by Camper Joe
Got the same problem

Re: Ninebot ES2 - error 49

Posted: Tue Jun 11, 2019 1:16 pm
by FirstJuicerInTown
I had the same. Had to update it again through original app to original firmware...

Re: Ninebot ES2 - error 49

Posted: Thu Sep 12, 2019 7:05 am
by Realmechanic2013
Error code 49 after flash ...... turn off hold down brake
Let error 15 come up keep holding brake till about 10 cycles when you let off brake error 49 will be gone
...... your welcome i tryed everything to make this fix and to be this simple i was kinda pissed To view images REGISTER or LOGIN for full access.
To view images REGISTER or LOGIN for full access.
To view images REGISTER or LOGIN for full access.

Re: Ninebot ES2 - error 49

Posted: Wed Sep 25, 2019 7:32 pm
by Cheedo
I just fixed this on one of my scooters. While using Ninebot-Flasher I noticed the BMS was version 1.2.5. I updated internal and external BMS to 1.4.1 and the error is now gone. If the error returns I’ll let y’all know but it seems error 49 is a BMS error. FYI here is a link where you can find the BMS file:

https://files.scooterhacking.org/esx/fw/bms/

Hope this helps someone!