Page 1 of 1

Size and name of the 4 screws holding handlebar

Posted: Sun Feb 10, 2019 10:12 am
by Jray517
Hi, I'm looking to replace the 4 screws the basic nine m365 scooter has where the neck tube holds the handlebar, they are the 4 screws you get a hex wrench to adjust with your first chargers. Size and length ? Thank you!

Re: Size and name of the 4 screws holding handlebar

Posted: Fri Feb 15, 2019 4:29 pm
by Squanto2015
Goto Home Depot and ask for torx screw bits with holes in them. These are called security bits or anti tamper torx screw bits. You well need to buy a set with all the sizes.

Re: Size and name of the 4 screws holding handlebar

Posted: Fri Feb 15, 2019 6:25 pm
by Ben J
Jray517 wrote:
Sun Feb 10, 2019 10:12 am
Hi, I'm looking to replace the 4 screws the basic nine m365 scooter has where the neck tube holds the handlebar, they are the 4 screws you get a hex wrench to adjust with your first chargers. Size and length ? Thank you!
Original screws are M5 flathead X 10mm.

Be sure your handlebar goes on the right way round.
Otherwise headlamp just illuminates on your Willie.