Page 15 of 19

Re: Lime Gen 3 Unlocked Software for 25kmh is now availiable

Posted: Wed Nov 17, 2021 4:24 pm
by Mister Flo
Dumbledore wrote:
Sat Nov 06, 2021 5:11 pm
Spintour wrote:
Fri Nov 15, 2019 3:46 pm
Hi,
I flashed the controller with the 20kmh and later with the 25 km/h file. But I can’t get it running.does it look like this I’m your setup?
Image
The problem is probably with the wrong black box version in combination with the controller version ... unfortunately only v2.3.0.0 of both devices works without any further problems

Hello @Spintour / Everyone
I'm currently facing the same issue, did you manage to fix this issue ?

Thanks for you help

Re: Lime Gen 3 Unlocked Software for 25kmh is now availiable

Posted: Fri Nov 19, 2021 12:51 am
by Sc00tr
Has anyone opened the "black box" to search for a pinout to it to possibly dump the version?

Re: Lime Gen 3 Unlocked Software for 25kmh is now availiable

Posted: Sun Nov 21, 2021 3:12 pm
by derVatterGE
is that still workin to unlock the controller??

but why is on one picture shown pin 1 & 4 with voltage?

and on the other only 4??

thx

Re: Lime Gen 3 Unlocked Software for 25kmh is now availiable

Posted: Sun Nov 21, 2021 5:27 pm
by Mister Flo
People you just have to set the 25km / h unlocked hex on the controller bottles, but the black box with version 2.4.0.0 must not be used because otherwise the red triangle will appear as an error message after a short time because the communication between both devices will be broken off. And to the question about reading out the black box, I only know that it is a kind of Linux-based system where there can be various options but no real solutions have been found yet

Re: Lime Gen 3 Unlocked Software for 25kmh is now availiable

Posted: Mon Nov 22, 2021 5:35 pm
by Sc00tr
Mister Flo wrote:
Sun Nov 21, 2021 5:27 pm
People you just have to set the 25km / h unlocked hex on the controller bottles, but the black box with version 2.4.0.0 must not be used because otherwise the red triangle will appear as an error message after a short time because the communication between both devices will be broken off. And to the question about reading out the black box, I only know that it is a kind of Linux-based system where there can be various options but no real solutions have been found yet
Just out of curiosity, how do you know that it's 2.4.0.0 and above? Is there somewhere to read out the version?

Re: Lime Gen 3 Unlocked Software for 25kmh is now availiable

Posted: Mon Nov 22, 2021 8:39 pm
by Mister Flo
It is a little sticker with the version number backside of the blackbox

Re: Lime Gen 3 Unlocked Software for 25kmh is now availiable

Posted: Mon Dec 06, 2021 2:09 pm
by Sc00tr
Mister Flo wrote:
Mon Nov 22, 2021 8:39 pm
It is a little sticker with the version number backside of the blackbox
Oh interesting so it might be a hardware revision not just software?

Re: Lime Gen 3 Unlocked Software for 25kmh is now availiable

Posted: Tue Dec 21, 2021 7:26 am
by MorganC
Thanks for this information!

Re: Lime Gen 3 Unlocked Software for 25kmh is now availiable

Posted: Mon Jan 24, 2022 3:02 pm
by Janferenc
Hey guys, I've converted the .hex firmware file to .c , If anyone knows how to find the speed or motor power variable that would be great. :)

Re: Lime Gen 3 Unlocked Software for 25kmh is now availiable

Posted: Fri Feb 11, 2022 5:08 pm
by edaloise
Need some help... I have the st-link connected and have attempted to flash. It says successful but only the brake light is turning on and the red LED on the controller is flashing 7 times. I tried grounded the 7th pin on the chip with no luck. My scooter does not have the GPS green box anymore is this box required for the unlock to work?