Page 1 of 2

Power on a green line scooter Box?

Posted: Tue Sep 17, 2019 9:25 pm
by Brettandesmy
Is there a way I can power the green box on after it has been removed to spoof location????

Re: Power on a green line scooter Box?

Posted: Sat Sep 21, 2019 5:51 pm
by M20001
Which generation is the scooter? Do you have a picture?

Re: Power on a green line scooter Box?

Posted: Tue Oct 08, 2019 10:31 am
by John Doe213
M20001 wrote:
Sat Sep 21, 2019 5:51 pm
Which generation is the scooter? Do you have a picture?
Do you know how to start the green box on a v3? Because the magnet trick doesn't work on this box (as far as I tried).

Re: Power on a green line scooter Box?

Posted: Sun Nov 03, 2019 10:15 pm
by M20001
Hello,

Connect the green box on the scooter and plug the scooter on a charger the scooter and the box will boot then. You can remove sim card.

Re: Power on a green line scooter Box?

Posted: Sun Nov 03, 2019 10:32 pm
by Kenny362
Can you just completely take the box off?

Re: Power on a green line scooter Box?

Posted: Tue Nov 05, 2019 12:10 pm
by M20001
Hello,

You can take the Box off, if the motor controller is unlocked the scooter will be still unlocked even without he box,
but the Display will not work anymore so you will not see your speed.

Re: Power on a green line scooter Box?

Posted: Sun Mar 08, 2020 12:35 am
by Cordobas
M20001 wrote:
Tue Nov 05, 2019 12:10 pm
Hello,

You can take the Box off, if the motor controller is unlocked the scooter will be still unlocked even without he box,
but the Display will not work anymore so you will not see your speed.
I can reflash the controller without the Green box? The scooter will work without this pcb:?: To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

Re: Power on a green line scooter Box?

Posted: Sun Mar 08, 2020 9:19 am
by M20001
As far as I know the scooter will work without this pcb, but you will have no tacho because this board controls the lcd screen. You have to try what works and what not because it seems there are many different lime gen 3 scooters. It looks like they have different firmware. So something works on some scooters, and on some not.

Re: Power on a green line scooter Box?

Posted: Sun Mar 08, 2020 1:13 pm
by Cordobas
M20001 wrote:
Sun Mar 08, 2020 9:19 am
As far as I know the scooter will work without this pcb, but you will have no tacho because this board controls the lcd screen. You have to try what works and what not because it seems there are many different lime gen 3 scooters. It looks like they have different firmware. So something works on some scooters, and on some not.
Thank you!
To view images REGISTER or LOGIN for full access.

Re: Power on a green line scooter Box?

Posted: Tue Mar 17, 2020 4:39 pm
by E39
Hi,
I guess the greenbox should be disabled. I think the greenbox plays against the motor controller. After flashing controller the greenbox is still connected. And this combination won't work for long.

Q: what thing (wire, ... etc.) must be changed for disabling the greenbox ? Is there a wire (VCC e.g. or RX/TX wire for communication with controller, ... ) to cut off ? I think its important how the throttle is wired through to the motor controller. Cause this part must work furthermore while greenbox is off / down.

Thanks! E39