- Wed Mar 18, 2020 4:01 am
#20184
The box probably uses UART (TX, RX) to communicate with the motor controller.
Thus if you remove this connection, the display won't work aswell.
There should be no separate line of communication for locking/unlocking and speed.
What you could try is to replace the green box with an Arduino/Raspberry Pie. But this requires a lot of research on how the communication between controller & box and box & display works.
Thus if you remove this connection, the display won't work aswell.
There should be no separate line of communication for locking/unlocking and speed.
What you could try is to replace the green box with an Arduino/Raspberry Pie. But this requires a lot of research on how the communication between controller & box and box & display works.