[M20001]

Hello,

Here: https://www.dropbox.com/sh/5qki3zu889bj ... BfKTa?dl=0

[pacurarcristian]

thanks ,

[shadowtamperer]

Hello,

If you use this firmware: https://www.dropbox.com/sh/mvplcn1fswp5 ... OpHOa?dl=0
You can keep the original controller. Thats much easier than swap the good geniue lime controller against a cheap chinese
controller. You only need STlink V2 to flash the software on the lime controller.

]
Hey there, a few questions, as im new to all of this. One, how do I do that? maybe link a tutorial? 2, can u send a working Dropbox link? this one is down. 3, Will this work for an american lime gen 3 scooter? Thank you!

[S!-Freak]

Hello,

Here: https://www.dropbox.com/sh/5qki3zu889bj ... BfKTa?dl=0

Wat does the firmware flash do? Just unlock the speed limit or more?

[Thybald]

Can someone help me? I have several lime gene3 but the green box is missing on all of them! Is this required?

[Neojunky]

Can someone help me? I have several lime gene3 but the green box is missing on all of them! Is this required?

Yes it is required, but there is some pin on the Blue Juliet which is power on state, not sure if you can just apply 5v onto it and it than runs

[John Doe88]

hello people.
dose someone has the files for unlocking the gen 3 lime?
i am sorry for my bad english. is there any youtube video or something like that?
thank you guys

[Thybald]

Sorry to bother you again. but how do you block the gps of the green box? Is there a sim in it? Think in Germany the gps is firmly soldered. if a scooter is not visible in the app, can lime not find it?

[Thybald]

I need help. I have problems reading the device correctly. where do I get GND from? how do i connect the usb stick to the circuit board?

[Thybald]

unfortunately don't get it. i connected red to pin 1 on the motherboard. pin 2 from the motherboard directly to gnd from the battery. swclk with pin 3 on the motherboard and finally 3.3v with pin 4