[dijkie]

[Can you please help me get one running? The kid upstairs needs a way to work and back and
this is perfect. Hotroddidit at yahoo . Com is my email. Id even pay you. quote=dijkie post_id=56329 time=1644765243 user_id=80978]
got it running, but it stops within 1 minute.
then powercycle and you can go again.
seems like controller is running hot or in protection and i need a more powerfull one.

all the rest works.

of the "instrument" line, cut the red wire and place key interlock in between, to have some theft protection.

[/quote]


I don't exactly understand your question to me.
can you refrase, i want to help, no problem

[Miraclemile]

Hi, I tried to drill the epoxy and screws out on the battery casing with no luck. How do you all manage to open the casing?

[Miraclemile]

5th attempt to get some help on this forum..

Opened the case, can I fit a Smart BMS 40? Does anyone know what Amps this battery can manage?

[Jevako030]

5th attempt to get some help on this forum..

Opened the case, can I fit a Smart BMS 40? Does anyone know what Amps this battery can manage?




Ampere is on the battery. If it's a big battery then a 14S BMS and a smart 40 I don't know, but any BMS can go in as long as you have the right 'series S'

[dijkie]

doesn't matter how much the battery can give, it matters how much you need at the motor.

the most battery's can give you > 45 Amps constant, but you won't need it in the motor.

look at how much you need, and find the matching BMS.
( Power = Voltage x Amps )

[koujimatou]

Hello everyone, I am French and I wanted to know if someone who knows everything would be willing to help me if possible on discord, because I have almost the same model but without the case in front and I don't know where to go find the GPS suddenly and how to make it work correctly

[Kyros21]

Hi Everyone,

I'm just starting my project to get back in track one Lime 4 which I have two battery pack with, one small and one big.

And I'm struggling with the choice of the BMS, which Amp should I choose ?

If I understood right, I have to calculate it with the power the motor can handle, which is a 350w.
So depending on the controller voltage which is 36 or 48V :

350/36 = 10 A
350/48 = 7,3 A

So I should use an 10 or 15A BMS to feed the 350w to the motor right ? So everyone who has a working lime gen 4 use a 10s 15A and a 14s 15A BMS ?

Thank you for your help.

[oalya]

14S6P. 84 cells. Any suggestions for a reliable replacement BMS?

https://nl.aliexpress.com/item/40004023 ... pt=glo2nld

Bonjour avez vous souder et tester ce bms ?

[scootermodding]

got my lime running using a 500w controller. 1000w didnt work for some reason

[Jevako030]

got my lime running using a 500w controller. 1000w didnt work for some reason

500w is